The Bolt,eye, cataloged under National Stock Number 5306-00-514-6938, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-514-6938 |
| Item Name | Bolt,eye |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Eye Stock Diameter | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| Eye Width | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN |
| Shank Length | 1.510 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE AND PAINT OVERALL |
| Eye Length | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| H2333-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-514-6938 is a Bolt,eye, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-514-6938: Eye Stock Diameter: 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN; Eye Width: 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE OVERALL; Thread Length: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.