The Bolt,shear, cataloged under National Stock Number 5306-00-486-1352, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-486-1352 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN |
| Fastener Length | 1.204 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN |
| Thread Length | 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN |
| Hole Configuration Style | HEXAGON CORNERS |
| Material Document and Classification | NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN |
| Width Between Flats | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Grip Diameter | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | TITANIUM ALLOY UNS R54520 OVERALL |
| Hole Quantity | 3 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS675V12H | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-486-1352 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-486-1352: Head Height: 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN; Fastener Length: 1.204 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN; Thread Length: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN; Hole Configuration Style: HEXAGON CORNERS. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.