The Bolt,internal Wrenching, cataloged under National Stock Number 5306-00-486-1095, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-486-1095 |
| Item Name | Bolt,internal Wrenching |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Width Across Flats | 0.062 INCHES NOMINAL IN |
| Head Height | 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| Fastener Length | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALLQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| Thread Length | 0.706 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN |
| Hardness Rating | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.073 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH180000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 155000 POUNDS PER SQUARE INCH155000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 7272 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNFUNF |
| Head Diameter | 0.118 INCHES MAXIMUM0.118 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 090-45100C1-24 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-486-1095 is a Bolt,internal Wrenching, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-486-1095: Width Across Flats: 0.062 INCHES NOMINAL IN; Head Height: 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN; Fastener Length: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALLQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.