The Bolt,close Tolerance, cataloged under National Stock Number 5306-00-479-5197, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 7 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-479-5197 |
| Primary Part Number | BM3210-4A017D |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.164 INCHES NOMINAL IN |
| Fastener Length | 1.339 INCHES MINIMUM AND 1.386 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | STSBS001 FSCM 98897 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.277 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES NOMINAL FIRST HOLE IN |
| Material Document and Classification | STSBS001 FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | DOUBLE HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.062 INCHES NOMINAL IN |
| Width Between Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | NICKEL AND CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 156000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.215 INCHES MINIMUM AND 1.247 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| BM3210-4A017D | Huck International, Inc (USA) |
| STSBG001A04D017 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| PBF1042A4D017 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| VS2979A04D017 | Howmet Global Fastening Systems Inc (USA) |
| VAL23602-4DS017 | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| 11701A04D017 | Reid Products Inc. Dba Reid Products Inc (USA) |
| AIC2264A04D017 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| Reference | Meaning |
|---|---|
| STSBG001A04D017 | 7/2 Vendor item drawing reference U.S. Government activity |
| BM3210-4A017D | 5/9 Secondary reference U.S. Government activity |
| 68485-4-017 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| 68485-4-017 | 3/2 Design control — primary reference U.S. Government activity |
| STSBG001A04D017 | 5/2 Secondary reference U.S. Government activity |
| VS2979A04D017 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-00-479-5197 is a Bolt,close Tolerance, manufactured by Huck International, Inc, classified under FSC 5306, Bolts. Status: active.
NSN 5306-00-479-5197 has 7 manufacturer part numbers on file: BM3210-4A017D (Huck International, Inc), STSBG001A04D017 (Sps Technologies, Llc Dba PB Fasteners), PBF1042A4D017 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), VS2979A04D017 (Howmet Global Fastening Systems Inc), VAL23602-4DS017 (Valley-Todeco, Inc. Dba Arconic Fastening Systems) and 2 more.
Key specifications for BM3210-4A017D: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.164 INCHES NOMINAL IN; Fastener Length: 1.339 INCHES MINIMUM AND 1.386 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.