The Bolt,shear, cataloged under National Stock Number 5306-00-352-0459, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 13 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-352-0459 |
| Primary Part Number | ST3M571-5H4 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | The Boeing Company Div Defense |
| Status | ACTIVE |
| Extended Washer Thickness | 0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN |
| Head Height | 0.338 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN |
| Fastener Length | 0.786 INCHES MINIMUM AND 0.816 INCHES MAXIMUM IN |
| Extended Washer Diameter | 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| Thread Length | 0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN |
| Hole Configuration Style | ROUND LONGITUDINAL HOLE |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | DOUBLE HEXAGON W/HOLE |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Width Between Flats | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN |
| Grip Diameter | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Hole Quantity | 4 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.055 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| S11 -1059-5H4 | Sonic Industries, Inc. Dba Sonic Industries Inc Div Sonic Industries (USA) |
| ST3M571-5H4 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| VAL23033-5H4 | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| ST3M571-5H4 | Fastener Innovation Technology, Inc. Dba F I T (USA) |
| BM3326-5H4 | Huck International, Inc (USA) |
| MB84-5H4 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| ST3M571-5H4 | Heartland Precision Fasteners Inc (USA) |
| GS1030-5H4 | B & B Specialties Inc Dba Gs Aerospace Div Gs Aerospace (USA) |
| VS3060-5H4 | Howmet Global Fastening Systems Inc (USA) |
| AIC752-5H4 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| MB84-5H4 | Hi-Shear Corporation (USA) |
| ST3M571-5H4 PRIMARY | The Boeing Company Div Defense (USA) |
| 74328-5H4 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| S371-5H4 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| 74328-5H4 | 5/2 Secondary reference U.S. Government activity |
| VS3060-5H4 | 5/9 Secondary reference U.S. Government activity |
| S371-5H4 | 5/9 Secondary reference U.S. Government activity |
| BM3326-5H4 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-00-352-0459 is a Bolt,shear, manufactured by The Boeing Company Div Defense, classified under FSC 5306, Bolts. Status: active.
NSN 5306-00-352-0459 has 13 manufacturer part numbers on file: S11 -1059-5H4 (Sonic Industries, Inc. Dba Sonic Industries Inc Div Sonic Industries), ST3M571-5H4 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), VAL23033-5H4 (Valley-Todeco, Inc. Dba Arconic Fastening Systems), ST3M571-5H4 (Fastener Innovation Technology, Inc. Dba F I T), BM3326-5H4 (Huck International, Inc) and 8 more.
Key specifications for ST3M571-5H4: Extended Washer Thickness: 0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN; Head Height: 0.338 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN; Fastener Length: 0.786 INCHES MINIMUM AND 0.816 INCHES MAXIMUM IN; Extended Washer Diameter: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.