PartsTable TECHNICAL DATA SHEET
NSN 5306-00-316-5570Government record, cited

Bolt, Internally Relieved Body5306-00-316-5570

NSN 5306-00-316-5570 · NIIN 003165570
FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5306-00-316-5570 · 5306003165570 · NIIN 003165570 · 00-316-5570 · FSC 5306 Bolts · 1286067-101 · 1286067-103
Nearby stock numbers  ·
Features
  • Bolt,internally Relieved Body — FSC 5306
  • Head Height: 0.446 INCHES NOMINAL IN
  • Fastener Length: 1.891 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: LC+77-1061 FSCM 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.355 INCHES NOMINAL IN
  • Shank Unthreaded Hole Diameter: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN
  • Criticality Code Justification: AAVH
  • Style Designator: COUNTERBORE UNTHREADED
Identification
  • NSN: 5306-00-316-5570
  • NIIN: 003165570
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
General Description

The Bolt,internally Relieved Body, cataloged under National Stock Number 5306-00-316-5570, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-00-316-5570
Item NameBolt,internally Relieved Body
FSC / FSG5306 / 53 — Bolts
StatusACTIVE
Head Height0.446 INCHES NOMINAL IN
Fastener Length1.891 INCHES NOMINAL IN
Surface Treatment Document and ClassificationLC+77-1061 FSCM 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.355 INCHES NOMINAL IN
Shank Unthreaded Hole Diameter0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN
Criticality Code JustificationAAVH
Style DesignatorCOUNTERBORE UNTHREADED
Material Document and ClassificationMIL-S-5000,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.625 INCHES IN
Counterbore Depth1.690 INCHES NOMINAL IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Counterbore Diameter0.577 INCHES MINIMUM AND 0.586 INCHES MAXIMUM IN
Width Between Flats1.250 INCHES NOMINAL IN
Shoulder Diameter0.8725 INCHES MINIMUM AND 0.8738 INCHES MAXIMUM IN
Concentric Hole Diameter0.260 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Minimum Tensile Strength200000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Test Data Document36659-LC+72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch18
MaterialSTEEL OVERALL
Shoulder Length1.370 INCHES NOMINAL IN
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.767 INCHES NOMINAL FIRST HOLE IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
1286067-101 5/9 Secondary reference
U.S. Government activity
1286067-103 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-004-7044
BOLT,INTERNALLY RELIEVED BODY
5306-00-007-6129
5306-00-007-6129 · Item name not on file
5306-00-008-7899
5306-00-008-7899 · Item name not on file
5306-00-009-4739
5306-00-009-4739 · Item name not on file
5306-00-118-7332
BOLT,MACHINE
5306-00-151-1777
BOLT,MACHINE
5306-00-255-4507
BOLT,EYE
5306-01-101-2459
BOLT,MACHINE

Frequently Asked Questions

What is NSN 5306-00-316-5570?

NSN 5306-00-316-5570 is a Bolt,internally Relieved Body, classified under FSC 5306, Bolts. Status: active.

What are the specifications of 5306-00-316-5570?

Key specifications for 5306-00-316-5570: Head Height: 0.446 INCHES NOMINAL IN; Fastener Length: 1.891 INCHES NOMINAL IN; Surface Treatment Document and Classification: LC+77-1061 FSCM 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.355 INCHES NOMINAL IN. 25 specifications are documented in the U.S. Government catalog.

Is NSN 5306-00-316-5570 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com