The Bolt,close Tolerance, cataloged under National Stock Number 5306-00-292-8282, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Leonardo Spa Helicopters Division - Production Site. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-292-8282 |
| Primary Part Number | AN173-7A |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Leonardo Spa Helicopters Division - Production Site |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Fastener Length | 0.890 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.374 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON FLATS |
| Material Document and Classification | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Width Between Flats | 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN |
| Grip Diameter | 0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4037 OR STEEL COMP 4140 OR STEEL COMP 4130 OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AN173-7A | Leonardo Spa Helicopters Division - Production Site (ITA) |
| Reference | Meaning |
|---|---|
| AN173H7A | 2/2 Government specification standardization U.S. Government activity |
| AN173-7A | 5/9 Secondary reference U.S. Government activity |
NSN 5306-00-292-8282 is a Bolt,close Tolerance, manufactured by Leonardo Spa Helicopters Division - Production Site, classified under FSC 5306, Bolts. Status: active.
NSN 5306-00-292-8282 has 1 manufacturer part number on file: AN173-7A (Leonardo Spa Helicopters Division - Production Site).
Key specifications for AN173-7A: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN; Fastener Length: 0.890 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.