The Bolt,internal Wrenching, cataloged under National Stock Number 5306-00-282-5233, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-282-5233 |
| Item Name | Bolt,internal Wrenching |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Width Across Flats | 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN |
| Head Height | 0.460 INCHES NOMINAL IN |
| Fastener Length | 1.297 INCHES MINIMUM AND 1.327 INCHES MAXIMUM IN |
| Thread Length | 0.797 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN |
| Hole Configuration Style | ROUND |
| Material Document and Classification | MIL-S-5000,COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS148 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP E4340 OVERALL |
| Hole Quantity | 6 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.072 INCHES NOMINAL IN |
| Head Diameter | 0.802 INCHES MINIMUM AND 0.813 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS148DH21 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-282-5233 is a Bolt,internal Wrenching, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-282-5233: Width Across Flats: 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN; Head Height: 0.460 INCHES NOMINAL IN; Fastener Length: 1.297 INCHES MINIMUM AND 1.327 INCHES MAXIMUM IN; Thread Length: 0.797 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.