The Bolt,eye, cataloged under National Stock Number 5306-00-271-4821, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5306-00-271-4821 |
| Primary Part Number | AN44-5 |
| Item Name | Bolt,eye |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use |
| Status | CANCELLED |
| Eye Stock Thickness | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN |
| Thread Class | 3A A |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Shoulder Diameter | 0.625 INCHES NOMINAL IN |
| Style Designator | ROUND, CLOSED W/SHOULDER |
| Thread Quantity Per Inch | 24 |
| Shoulder Thickness | 0.094 INCHES NOMINAL IN |
| Shank Unthreaded Hole Diameter | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Distance From Threaded End to Shank Hole Center | 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM FIRST HOLE IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Eye Outside Width | 0.625 INCHES NOMINAL IN |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| Thread Series Designator | UNF |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Direction | RIGHT-HAND |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Thread Length | 0.515 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| Eye Inside Diameter | 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN |
| Shank Length | 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Acquisition Status | CANCELLED |
| Successor | 5306-00-151-1128 |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN44-5 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| AN44-5 PRIMARY | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
| 5306PL1495047 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
NSN 5306-00-271-4821 is a Bolt,eye, manufactured by National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use, classified under FSC 5306 (No Item Name Available). Status: cancelled.
NSN 5306-00-271-4821 has 3 cross-referenced part numbers: AN44-5 (Aeronautical Standards Group Dept of Navy and Air Force), AN44-5 (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use), 5306PL1495047 (Jednolity Indeks Materialowy - Uniform Material Index).
There are 3 known substitutes for 5306-00-271-4821: 5306-00-206-3867, 5306-00-151-1128, 5940-00-754-5441. Verify interchangeability with system specifications before substitution.
Key specifications for AN44-5: Eye Stock Thickness: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN; Thread Class: 3A A; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL; Shoulder Diameter: 0.625 INCHES NOMINAL IN. 21 total characteristics are documented in the Federal Logistics Information System.
NSN 5306-00-271-4821 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.