The Bolt,internal Wrenching, cataloged under National Stock Number 5306-00-269-6548, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-269-6548 |
| Item Name | Bolt,internal Wrenching |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES TOP OF HEAD |
| Surface Finish | 32.0 MICROINCHES SIDES OF HEAD |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Width Across Flats | 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN |
| Head Height | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Fastener Length | 2.735 INCHES MINIMUM AND 2.765 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.802 INCHES MINIMUM AND 0.963 INCHES MAXIMUM IN |
| Hardness Rating | 34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Head Style | BEVEL-CONICAL |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20010-29 | 3/2 Design control — primary reference U.S. Government activity |
| MS20010-29 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-00-269-6548 is a Bolt,internal Wrenching, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-269-6548: Surface Finish: 32.0 MICROINCHES TOP OF HEAD; Surface Finish: 32.0 MICROINCHES SIDES OF HEAD; Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 63.0 MICROINCHES GRIP. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.