The Bolt,internally Relieved Body, cataloged under National Stock Number 5306-00-208-0266, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-208-0266 |
| Item Name | Bolt,internally Relieved Body |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.250 INCHES NOMINAL IN |
| Fastener Length | 7.000 INCHES NOMINAL IN |
| Thread Length | 0.540 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.141 INCHES MINIMUM AND 0.166 INCHES MAXIMUM FIRST HOLE IN |
| Style Designator | CONCENTRIC HOLE UNTHREADED |
| Material Document and Classification | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 1.500 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 1.990 INCHES MINIMUM AND 2.003 INCHES MAXIMUM IN |
| Concentric Hole Diameter | 1.060 INCHES NOMINAL IN |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP 4130 OR STEEL COMP 4340 OR STEEL COMP 4140 OVERALL |
| Thread Series Designator | UN |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 6.560 INCHES NOMINAL FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 6-34595-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-208-0266 is a Bolt,internally Relieved Body, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-208-0266: Head Height: 0.250 INCHES NOMINAL IN; Fastener Length: 7.000 INCHES NOMINAL IN; Thread Length: 0.540 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.141 INCHES MINIMUM AND 0.166 INCHES MAXIMUM FIRST HOLE IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.