The Bolt,shear, cataloged under National Stock Number 5306-00-206-9322, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-206-9322 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.400 INCHES NOMINAL IN |
| Fastener Length | 5.310 INCHES NOMINAL IN |
| Thread Length | 0.875 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.138 INCHES MINIMUM AND 0.143 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Grip Length | 4.215 INCHES NOMINAL IN |
| Width Between Flats | 1.125 INCHES NOMINAL IN |
| Grip Diameter | 0.7476 INCHES MINIMUM AND 0.7483 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 260000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP E4340 OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 5.040 INCHES NOMINAL FIRST HOLE IN |
| Head Diameter | 1.375 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 345122 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-206-9322 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5998-01-176-2275. Verify interchangeability with system specifications before substitution.
Key specifications for 5306-00-206-9322: Head Height: 0.400 INCHES NOMINAL IN; Fastener Length: 5.310 INCHES NOMINAL IN; Thread Length: 0.875 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.138 INCHES MINIMUM AND 0.143 INCHES MAXIMUM FIRST HOLE IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.