The Bolt,internal Wrenching, cataloged under National Stock Number 5306-00-206-0761, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-206-0761 |
| Item Name | Bolt,internal Wrenching |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Width Across Flats | 0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN |
| Head Height | 0.438 INCHES NOMINAL IN |
| Fastener Length | 2.062 INCHES NOMINAL IN |
| Thread Length | 0.812 INCHES MINIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.438 INCHES IN |
| Head Style | BEVEL-CONICAL |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20007H20 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-00-206-0761 is a Bolt,internal Wrenching, classified under FSC 5306, Bolts. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5306-00-206-0803. Verify interchangeability with system specifications before substitution.
Key specifications for 5306-00-206-0761: Width Across Flats: 0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN; Head Height: 0.438 INCHES NOMINAL IN; Fastener Length: 2.062 INCHES NOMINAL IN; Thread Length: 0.812 INCHES MINIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.