The Bolt,machine, cataloged under National Stock Number 5306-00-182-1815, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5306-00-182-1815 |
| Primary Part Number | AN5C6 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | CANCELLED |
| Thread Class | 3A A |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.656 INCHES MINIMUM AND 0.688 INCHES MAXIMUM FIRST HOLE IN |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Hole Configuration Style | HEXAGON FLATS |
| Material | STEEL COMP 431 OVERALL |
| Surface Treatment | PASSIVATE OVERALL |
| Hole Quantity | 1 |
| Head Height | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Head Style | HEXAGON |
| Material Document and Classification | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Thread Quantity Per Inch | 24 |
| Width Between Flats | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Thread Series Designator | UNF |
| Features Provided | FINISHED HEAD |
| Thread Length | 0.500 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN |
| Hole Type | DRILLED |
| Grip Length | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN |
| Fastener Length | 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN |
| Acquisition Status | CANCELLED |
| Successor | 5306-00-051-2338 |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN5C6 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| B6812 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| AN5CH6 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
NSN 5306-00-182-1815 is a Bolt,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5306 (No Item Name Available). Status: cancelled.
NSN 5306-00-182-1815 has 3 cross-referenced part numbers: AN5C6 (Aeronautical Standards Group Dept of Navy and Air Force), B6812 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), AN5CH6 (Aeronautical Standards Group Dept of Navy and Air Force).
There are 12 known substitutes for 5306-00-182-1815: 5306-00-151-2440, 5306-00-051-2338, 5306-00-051-2343 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for AN5C6: Thread Class: 3A A; Distance From Head Largest Bearing Surface to Shank Hole Center: 0.656 INCHES MINIMUM AND 0.688 INCHES MAXIMUM FIRST HOLE IN; Hole Diameter: 0.070 INCHES NOMINAL IN; Hole Configuration Style: HEXAGON FLATS. 23 total characteristics are documented in the Federal Logistics Information System.
NSN 5306-00-182-1815 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.