The Bolt,machine, cataloged under National Stock Number 5306-00-180-2674, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-180-2674 |
| Primary Part Number | AN5H24A |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use |
| Status | ACTIVE |
| Width Between Flats | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Grip Length | 2.062 INCHES NOMINAL IN |
| Features Provided | FINISHED HEAD |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Head Height | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-B-6812 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Thread Length | 0.532 INCHES MINIMUM IN |
| Hole Quantity | 1 |
| Thread Direction | RIGHT-HAND |
| Material | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL |
| Hole Configuration Style | HEXAGON FLATS |
| Thread Class | 3A A |
| Fastener Length | 2.594 INCHES NOMINAL IN |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Thread Series Designator | UNF |
| Thread Quantity Per Inch | 24 |
| Head Style | HEXAGON |
| Acquisition Status | ACTIVE |
| Successor | 5306-00-151-2619 |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN5H24A | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| AN5-24A | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| NASM3 THRU NASM20-AN5H24A | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
| AN5H24A PRIMARY | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
NSN 5306-00-180-2674 is a Bolt,machine, manufactured by National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use, classified under FSC 5306 (No Item Name Available). Status: active.
NSN 5306-00-180-2674 has 4 cross-referenced part numbers: AN5H24A (Aeronautical Standards Group Dept of Navy and Air Force), AN5-24A (Aeronautical Standards Group Dept of Navy and Air Force), NASM3 THRU NASM20-AN5H24A (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use), AN5H24A (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use).
There is 1 known substitute for 5306-00-180-2674: 5306-00-151-2619. Verify interchangeability with system specifications before substitution.
Key specifications for AN5H24A: Width Between Flats: 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN; Grip Length: 2.062 INCHES NOMINAL IN; Features Provided: FINISHED HEAD; Hole Type: DRILLED. 22 total characteristics are documented in the Federal Logistics Information System.