PartsTable TECHNICAL DATA SHEET
NSN 5306-00-173-8123Government record, cited

Bolt, Machine5306-00-173-8123

NSN 5306-00-173-8123 · NIIN 001738123 · Part number NAS1006-13
Plastic and Metal Products Corporation · FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives · CAGE 53606
Government record, cited
NSN 5306-00-173-8123 — this item is cataloged by the U.S. Government under National Stock Number 5306-00-173-8123. Manufacturer of record part number: NAS1006-13.
Also searched as  5306-00-173-8123 · 5306001738123 · NIIN 001738123 · 00-173-8123 · FSC 5306 Bolts · CAGE 53606 · NAS1006-13 · NAS106-13
Nearby stock numbers  ·
Features
  • Bolt,machine — FSC 5306
  • Head Height: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
  • Fastener Length: 1.460 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.633 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
  • Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
  • Material Document and Classification: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.375 INCHES IN
Identification
  • NSN: 5306-00-173-8123
  • NIIN: 001738123
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: NAS1006-13
  • Manufacturer: Plastic and Metal Products Corporation
General Description

The Bolt,machine, cataloged under National Stock Number 5306-00-173-8123, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Plastic and Metal Products Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 13 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-00-173-8123
Primary Part NumberNAS1006-13
Item NameBolt,machine
FSC / FSG5306 / 53 — Bolts
ManufacturerPlastic and Metal Products Corporation
StatusACTIVE
Head Height0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
Fastener Length1.460 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.633 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
Shank Unthreaded Hole Diameter0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.375 INCHES IN
Features ProvidedFINISHED HEAD
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1006 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length0.797 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN
Width Between Flats0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength140000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch24
MaterialIRON ALLOY 660 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM FIRST HOLE IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
NAS1006-13 Plastic and Metal Products Corporation (USA)
NAS1006-13 Nor-Cal Supply Co (USA)
NAS1006-13 Fastener Innovation Technology, Inc. Dba F I T (USA)
Reference documents
ReferenceMeaning
NAS1006-13 5/9 Secondary reference
U.S. Government activity
NAS106-13 5/9 Secondary reference
Hi-Shear Corporation
NAS1006-13 C/1 Advisory reference — outside the item-of-supply concept
Huck International, Inc
NAS1006-13 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
NAS1006-13 5/2 Secondary reference
U.S. Government activity
NAS1006-13 3/2 Design control — primary reference
U.S. Government activity
NAS1006-13 5/9 Secondary reference
Air Industries Co Inc
NAS1006-13 5/9 Secondary reference
U.S. Government activity
NAS1006-13 5/9 Secondary reference
Apcom Inc
NAS1006-13 5/9 Secondary reference
Lawrence Engineering and Supply Inc
NAS1006-13 5/9 Secondary reference
Long-Lok Llc
NAS1006-13 5/9 Secondary reference
Nd Industries Inc Div Eastern Division
NAS1006-13 5/9 Secondary reference
F and C Sales Inc
No interchangeability data on file.
Other items in FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-004-7044
BOLT,INTERNALLY RELIEVED BODY
5306-00-007-6129
5306-00-007-6129 · Item name not on file
5306-00-008-7899
5306-00-008-7899 · Item name not on file
5306-00-009-4739
5306-00-009-4739 · Item name not on file
5306-00-118-7332
BOLT,MACHINE
5306-00-151-1777
BOLT,MACHINE
5306-00-255-4507
BOLT,EYE
5306-01-101-2459
BOLT,MACHINE

Frequently Asked Questions

What is NSN 5306-00-173-8123?

NSN 5306-00-173-8123 is a Bolt,machine, manufactured by Plastic and Metal Products Corporation, classified under FSC 5306, Bolts. Status: active.

What part numbers are listed for NSN 5306-00-173-8123?

NSN 5306-00-173-8123 has 3 manufacturer part numbers on file: NAS1006-13 (Plastic and Metal Products Corporation), NAS1006-13 (Nor-Cal Supply Co), NAS1006-13 (Fastener Innovation Technology, Inc. Dba F I T).

What are the specifications of NAS1006-13?

Key specifications for NAS1006-13: Head Height: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN; Fastener Length: 1.460 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.633 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5306-00-173-8123 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com