The Bolt,clevis, cataloged under National Stock Number 5306-00-156-2752, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-156-2752 |
| Primary Part Number | AN32-56 |
| Item Name | Bolt,clevis |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Shank Unthreaded Hole Diameter | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN |
| Thread Direction | RIGHT-HAND |
| Head Diameter | 1.312 INCHES NOMINAL IN |
| Thread Series Designator | UNF |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Single Shear Strength | ERR-060 |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Departure From Cited Document | THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW SHANK BOLT DIA |
| Thread Series Designator | UNF |
| Material Document and Classification | MIL-B-6812 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| Head Style | BUTTON |
| Departure From Cited Document | THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW SHANK BOLT DIA |
| Material | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL |
| Internal Drive Style | SLOT |
| Thread Quantity Per Inch | 16 |
| Material Document and Classification | MIL-B-6812 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| Head Height | 0.375 INCHES NOMINAL IN |
| Internal Drive Style | SLOT |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Fastener Length | 3.562 INCHES NOMINAL IN |
| Thread Quantity Per Inch | 16 |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Thread Length | 0.562 INCHES MINIMUM IN |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 3.375 INCHES NOMINAL FIRST HOLE IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN32-56 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
NSN 5306-00-156-2752 is a Bolt,clevis, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5306 (No Item Name Available). Status: active.
NSN 5306-00-156-2752 has 1 cross-referenced part number: AN32-56 (Aeronautical Standards Group Dept of Navy and Air Force).
There is 1 known substitute for 5306-00-156-2752: 5310-00-620-8201. Verify interchangeability with system specifications before substitution.
Key specifications for AN32-56: Shank Unthreaded Hole Diameter: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN; Thread Direction: RIGHT-HAND; Head Diameter: 1.312 INCHES NOMINAL IN; Thread Series Designator: UNF. 30 total characteristics are documented in the Federal Logistics Information System.