The Bolt,machine, cataloged under National Stock Number 5306-00-156-2665, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-156-2665 |
| Primary Part Number | AN7-54 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use |
| Status | ACTIVE |
| Head Height | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 5.422 INCHES NOMINAL FIRST HOLE IN |
| Thread Quantity Per Inch | 20 |
| Material Document and Classification | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| Thread Length | 0.656 INCHES MINIMUM IN |
| Material | STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4037 OR STEEL COMP 4140 OR STEEL COMP 4130 OVERALL |
| Thread Series Designator | UNF |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Width Between Flats | 0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Features Provided | FINISHED HEAD |
| Head Style | HEXAGON |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Grip Length | 4.938 INCHES NOMINAL IN |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Nominal Thread Diameter | 0.438 INCHES IN |
| Shank Unthreaded Hole Diameter | 0.106 INCHES NOMINAL FIRST HOLE IN |
| Thread Direction | RIGHT-HAND |
| Fastener Length | 5.594 INCHES NOMINAL IN |
| Thread Class | 3A A |
| Acquisition Status | ACTIVE |
| Successor | 5306-00-150-9148 |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN7-54 PRIMARY | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
| NASM3 THRU NASM20 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
| AN7-54 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
NSN 5306-00-156-2665 is a Bolt,machine, manufactured by National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use, classified under FSC 5306 (No Item Name Available). Status: active.
NSN 5306-00-156-2665 has 3 cross-referenced part numbers: AN7-54 (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use), NASM3 THRU NASM20 (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use), AN7-54 (Aeronautical Standards Group Dept of Navy and Air Force).
There are 2 known substitutes for 5306-00-156-2665: 5306-00-150-9148, 5306-00-180-2782. Verify interchangeability with system specifications before substitution.
Key specifications for AN7-54: Head Height: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN; Distance From Head Largest Bearing Surface to Shank Hole Center: 5.422 INCHES NOMINAL FIRST HOLE IN; Thread Quantity Per Inch: 20; Material Document and Classification: MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 6TH MATERIAL RESPONSE OVERALL. 20 total characteristics are documented in the Federal Logistics Information System.