The Bolt,clevis, cataloged under National Stock Number 5306-00-151-2652, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-151-2652 |
| Item Name | Bolt,clevis |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Head Height | 0.188 INCHES NOMINAL IN |
| Fastener Length | 2.547 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Groove Diameter | 0.308 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN |
| Thread Length | 0.276 INCHES MINIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | BUTTON |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4130 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 2.391 INCHES MINIMUM AND 2.422 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.688 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN26-40 | 2/2 Government specification standardization U.S. Government activity |
NSN 5306-00-151-2652 is a Bolt,clevis, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-151-2652: Head Height: 0.188 INCHES NOMINAL IN; Fastener Length: 2.547 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Groove Diameter: 0.308 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.