The Bolt,machine, cataloged under National Stock Number 5306-00-151-1942, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 21 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 4 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5306-00-151-1942 |
| Primary Part Number | AN174-11 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | CANCELLED |
| Thread Direction | RIGHT-HAND |
| Shank Unthreaded Hole Diameter | 0.076 INCHES NOMINAL FIRST HOLE IN |
| Thread Length | 0.469 INCHES MINIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Style | HEXAGON |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Features Provided | FINISHED HEAD |
| Thread Quantity Per Inch | 28 |
| Surface Treatment | CADMIUM AND DICHROMATE OVERALL |
| Grip Length | 0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.000 INCHES NOMINAL FIRST HOLE IN |
| Fastener Length | 1.140 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN |
| Head Height | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| Thread Series Designator | UNF |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Width Between Flats | 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Thread Class | 3A A |
| Acquisition Status | CANCELLED |
| Successor | 5340-00-191-3660 (8411) |
| HAZMAT | No |
NSN 5306-00-151-1942 is a Bolt,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5306 (No Item Name Available). Status: cancelled.
NSN 5306-00-151-1942 has 3 cross-referenced part numbers: AN174-11 (Aeronautical Standards Group Dept of Navy and Air Force), 84-11 (Department of the Air Force), AN174-11 (Leonardo Spa Helicopters Division - Production Site).
There are 4 known substitutes for 5306-00-151-1942: 5306-00-292-8263, 5340-00-191-3660, 5340-01-247-5901 and 1 more. Verify interchangeability with system specifications before substitution.
Key specifications for AN174-11: Thread Direction: RIGHT-HAND; Shank Unthreaded Hole Diameter: 0.076 INCHES NOMINAL FIRST HOLE IN; Thread Length: 0.469 INCHES MINIMUM IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL. 21 total characteristics are documented in the Federal Logistics Information System.
NSN 5306-00-151-1942 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.