The Bolt,machine, cataloged under National Stock Number 5306-00-144-3654, is classified within Federal Supply Class 5306 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-144-3654 |
| Primary Part Number | AN3-15 |
| Item Name | Bolt,machine |
| FSC / FSG | 5306 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Width Between Flats | 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN |
| Thread Length | 0.375 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN |
| Fastener Length | 1.641 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN |
| Grip Length | 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Direction | RIGHT-HAND |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Head Height | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 4TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 5TH MATERIAL RESPONSE OVERALL |
| Thread Series Designator | UNF |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.500 INCHES MINIMUM AND 1.531 INCHES MAXIMUM FIRST HOLE IN |
| Features Provided | FINISHED HEAD |
| Thread Class | 3A A |
| Head Style | HEXAGON |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN3-15 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| AN3-15 | Leonardo Spa Helicopters Division - Production Site (ITA) |
| 932.19.21.010 | Pilatus Aircraft Ltd (CHE) |
NSN 5306-00-144-3654 is a Bolt,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5306 (No Item Name Available). Status: active.
NSN 5306-00-144-3654 has 3 cross-referenced part numbers: AN3-15 (Aeronautical Standards Group Dept of Navy and Air Force), AN3-15 (Leonardo Spa Helicopters Division - Production Site), 932.19.21.010 (Pilatus Aircraft Ltd).
There is 1 known substitute for 5306-00-144-3654: 5962-01-157-2249. Verify interchangeability with system specifications before substitution.
Key specifications for AN3-15: Width Between Flats: 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN; Thread Length: 0.375 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN; Fastener Length: 1.641 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN; Grip Length: 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN. 20 total characteristics are documented in the Federal Logistics Information System.