PartsTable TECHNICAL DATA SHEET
NSN 5306-00-143-1376Government record, cited

Bolt, Machine5306-00-143-1376

NSN 5306-00-143-1376 · NIIN 001431376 · Part number 2-141-126-01
Morton Grinding, Inc Dba Morton Manufacturing · FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives · CAGE 2T498
Government record, cited
NSN 5306-00-143-1376 — this item is cataloged by the U.S. Government under National Stock Number 5306-00-143-1376. Manufacturer of record part number: 2-141-126-01.
Also searched as  5306-00-143-1376 · 5306001431376 · NIIN 001431376 · 00-143-1376 · FSC 5306 Bolts · CAGE 2T498 · 2-141-126-01
Nearby stock numbers  ·
Features
  • Bolt,machine — FSC 5306
  • Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD
  • Head Height: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
  • Fastener Length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
  • Precious Material: SILVER
  • Thread Length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
  • Hardness Rating: 65.0 ROCKWELL A MINIMUM AND 69.0 ROCKWELL A MAXIMUM OVERALL
Identification
  • NSN: 5306-00-143-1376
  • NIIN: 001431376
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 2-141-126-01
  • Manufacturer: Morton Grinding, Inc Dba Morton Manufacturing
General Description

The Bolt,machine, cataloged under National Stock Number 5306-00-143-1376, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Morton Grinding, Inc Dba Morton Manufacturing. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-00-143-1376
Primary Part Number2-141-126-01
Item NameBolt,machine
FSC / FSG5306 / 53 — Bolts
ManufacturerMorton Grinding, Inc Dba Morton Manufacturing
StatusACTIVE
Surface Finish63.0 MICROINCHES BEARING SURFACE OF HEAD
Head Height0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
Fastener Length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationAMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Precious MaterialSILVER
Thread Length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
Hardness Rating65.0 ROCKWELL A MINIMUM AND 69.0 ROCKWELL A MAXIMUM OVERALL
Criticality Code JustificationTEST
Hole Configuration StyleHEXAGON LONGITUDINAL HOLE
Material Document and Classification+8012,FSCM 91547 MFR REF SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.190 INCHES IN
Features ProvidedFINISHED HEAD
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Width Between Flats0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
Surface TreatmentSILVER OVERALL
Thread Class3A A
Test Data Document+6808-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch32
MaterialSTEEL CORROSION RESISTING OVERALL
Hole Quantity6
Thread Series DesignatorUNF
Hole TypeDRILLED
Hole Diameter0.047 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5360-01-020-9450214-1126-01 POSSIBLE MATCH
SPRING,FLAT
Possible match (shared part number)Tektronix, Inc.
Cross-Reference Index
Part NumberManufacturer
2-141-126-01 Morton Grinding, Inc Dba Morton Manufacturing (USA)
2-141-126-01 J.w. Manufacturing, Inc Dba Arconic Fastening Systems and Rings (USA)
Reference documents
ReferenceMeaning
2-141-126-01 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5360-01-020-9450POSSIBLE MATCH
SPRING,FLAT
214-1126-01

Frequently Asked Questions

What is NSN 5306-00-143-1376?

NSN 5306-00-143-1376 is a Bolt,machine, manufactured by Morton Grinding, Inc Dba Morton Manufacturing, classified under FSC 5306, Bolts. Status: active.

What part numbers are listed for NSN 5306-00-143-1376?

NSN 5306-00-143-1376 has 2 manufacturer part numbers on file: 2-141-126-01 (Morton Grinding, Inc Dba Morton Manufacturing), 2-141-126-01 (J.w. Manufacturing, Inc Dba Arconic Fastening Systems and Rings).

What NSN replaces 5306-00-143-1376?

1 possible match (shared part number, not a government interchangeability claim): 5360-01-020-9450. Verify interchangeability with system specifications before substitution.

What are the specifications of 2-141-126-01?

Key specifications for 2-141-126-01: Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN; Fastener Length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 24 specifications are documented in the U.S. Government catalog.

Is NSN 5306-00-143-1376 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com