The Bolt,close Tolerance, cataloged under National Stock Number 5306-00-121-8872, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Satair A/s. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-121-8872 |
| Primary Part Number | AS194-4-32 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Manufacturer | Satair A/s |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Fastener Length | 2.418 INCHES MINIMUM AND 2.438 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| Thread Length | 0.282 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | MIL-B-83050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | DISHED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.000 INCHES MINIMUM AND 2.016 INCHES MAXIMUM IN |
| Width Between Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | F |
| Part Number | Manufacturer |
|---|---|
| AS194-4-32 | Satair A/s (DNK) |
| Reference | Meaning |
|---|---|
| CA4510-4-32 | 5/9 Secondary reference Howmet Global Fastening Systems Inc. Div Tridair Products |
| MS27576-4-32 | 5/9 Secondary reference U.S. Government activity |
| CIPRD-MS27576-4-32R | 5/9 Secondary reference U.S. Government activity |
| 106467-4-32 | 3/2 Design control — primary reference U.S. Government activity |
| MS27576-4-32R | 5/1 Secondary reference U.S. Government activity |
| MS27576-4-32 | 5/9 Secondary reference U.S. Government activity |
| AS194-4-32 | 5/9 Secondary reference U.S. Government activity |
| CIPRD-MS27576-4-32R | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| CIPRD-MS27576-4-32R | 5/9 Secondary reference M.s. Aerospace Inc. Dba Ms Aerospace Inc |
NSN 5306-00-121-8872 is a Bolt,close Tolerance, manufactured by Satair A/s, classified under FSC 5306, Bolts. Status: active.
NSN 5306-00-121-8872 has 1 manufacturer part number on file: AS194-4-32 (Satair A/s).
Key specifications for AS194-4-32: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN; Fastener Length: 2.418 INCHES MINIMUM AND 2.438 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.