The Bolt,eye, cataloged under National Stock Number 5306-00-090-1684, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-090-1684 |
| Item Name | Bolt,eye |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Eye Stock Diameter | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| Thread Length | 0.330 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| Shank Length | 1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Distance From Center of Eye to Shank End | 1.352 INCHES NOMINAL IN |
| Shoulder Diameter | 0.290 INCHES NOMINAL IN |
| Shoulder Thickness | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| Surface Treatment | ZINC HEAD |
| Surface Treatment | ZINC GRIP |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Eye Inside Diameter | 0.180 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 8630 OVERALL |
| Thread Series Designator | UNF |
| Eye Outside Width | 0.400 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 6-63321-8 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-090-1684 is a Bolt,eye, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-090-1684: Eye Stock Diameter: 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN; Thread Length: 0.330 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN; Shank Length: 1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN; Material Document and Classification: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.