PartsTable TECHNICAL DATA SHEET
NSN 5306-00-056-8510Government record, cited

Bolt, Externally Relieved Body5306-00-056-8510

NSN 5306-00-056-8510 · NIIN 000568510 · Part number 482892
Kito Mfg Co. Ltd · FSC 5306 — Bolts · FSG 53 — Hardware and Abrasives · CAGE J1695
Government record, cited
NSN 5306-00-056-8510 — this item is cataloged by the U.S. Government under National Stock Number 5306-00-056-8510. Manufacturer of record part number: 482892.
Also searched as  5306-00-056-8510 · 5306000568510 · NIIN 000568510 · 00-056-8510 · FSC 5306 Bolts · CAGE J1695 · 482892
Nearby stock numbers  ·
Features
  • Bolt,externally Relieved Body — FSC 5306
  • Fourth Diameter From Head: 0.194 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
  • Distance From Largest Bearing Surface of Head to End of Fifth Diameter: 2.430 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN
  • Head Height: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
  • Fastener Length: 2.430 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.380 INCHES MINIMUM IN
  • Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
Identification
  • NSN: 5306-00-056-8510
  • NIIN: 000568510
  • FSC: 5306 — Bolts
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 482892
  • Manufacturer: Kito Mfg Co. Ltd
General Description

The Bolt,externally Relieved Body, cataloged under National Stock Number 5306-00-056-8510, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. The manufacturer of record is Kito Mfg Co. Ltd. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5306-00-056-8510
Primary Part Number482892
Item NameBolt,externally Relieved Body
FSC / FSG5306 / 53 — Bolts
ManufacturerKito Mfg Co. Ltd
StatusACTIVE
Fourth Diameter From Head0.194 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
Distance From Largest Bearing Surface of Head to End of Fifth Diameter2.430 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN
Head Height0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
Fastener Length2.430 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.380 INCHES MINIMUM IN
Hardness Rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
Shank Unthreaded Hole Diameter0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
First Diameter From Head0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
Distance From Largest Bearing Surface of Head to End of Second Diameter0.530 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
Nominal Thread Diameter0.250 INCHES IN
Distance From Largest Bearing Surface of Head to End of Third Diameter0.930 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Second Diameter From Head0.194 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
Width Between Flats0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
Distance From Largest Bearing Surface of Head to End of First Diameter0.210 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Fifth Diameter From Head0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
Externally Relieved Body Diameter Quantity5
Surface TreatmentCADMIUM OVERALL
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL OVERALL
Distance From Largest Bearing Surface of Head to End of Fourth Diameter2.070 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN
Third Diameter From Head0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
Thread Series DesignatorUNF
Distance From Head Largest Bearing Surface to Shank Hole Center2.785 INCHES NOMINAL FIRST HOLE IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
482892 PRIMARY Kito Mfg Co. Ltd (JPN)
482892 Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney (USA)
Reference documents
ReferenceMeaning
482892 3/9 Design control — primary reference
Kito Mfg Co. Ltd
482892 5/9 Secondary reference
Turbo Power & Marine System Inc Sub of United Technologies Corp
No interchangeability data on file.
Other items in FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276
5306-00-001-1276 · Item name not on file
5306-00-001-1949
5306-00-001-1949 · Item name not on file
5306-00-001-1988
5306-00-001-1988 · Item name not on file
5306-00-001-1989
5306-00-001-1989 · Item name not on file
5306-00-001-1990
5306-00-001-1990 · Item name not on file
5306-00-001-1991
5306-00-001-1991 · Item name not on file
5306-00-001-1993
BOLT,SHEAR
5306-00-001-2017
BOLT,MACHINE

Frequently Asked Questions

What is NSN 5306-00-056-8510?

NSN 5306-00-056-8510 is a Bolt,externally Relieved Body, manufactured by Kito Mfg Co. Ltd, classified under FSC 5306, Bolts. Status: active.

What part numbers are listed for NSN 5306-00-056-8510?

NSN 5306-00-056-8510 has 2 manufacturer part numbers on file: 482892 (Kito Mfg Co. Ltd), 482892 (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney).

What are the specifications of 482892?

Key specifications for 482892: Fourth Diameter From Head: 0.194 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN; Distance From Largest Bearing Surface of Head to End of Fifth Diameter: 2.430 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN; Head Height: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN; Fastener Length: 2.430 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 5306-00-056-8510 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com