The Bolt,shear, cataloged under National Stock Number 5306-00-034-0575, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-034-0575 |
| Item Name | Bolt,shear |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Extended Washer Thickness | 0.075 INCHES NOMINAL IN |
| Head Height | 0.405 INCHES NOMINAL IN |
| Fastener Length | 1.188 INCHES NOMINAL IN |
| Extended Washer Diameter | 0.715 INCHES MINIMUM AND 0.725 INCHES MAXIMUM IN |
| Thread Length | 0.375 INCHES MINIMUM IN |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | DOUBLE HEXAGON EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.500 INCHES NOMINAL IN |
| Width Between Flats | 0.561 INCHES NOMINAL IN |
| Grip Diameter | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| EWBTM9-6-8 | 5/9 Secondary reference U.S. Government activity |
| EWBTM9-6-8 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| BM9022-6-8 | 5/9 Secondary reference U.S. Government activity |
| BACB30EJ6-8 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5306-00-034-0575 is a Bolt,shear, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-034-0575: Extended Washer Thickness: 0.075 INCHES NOMINAL IN; Head Height: 0.405 INCHES NOMINAL IN; Fastener Length: 1.188 INCHES NOMINAL IN; Extended Washer Diameter: 0.715 INCHES MINIMUM AND 0.725 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.