The Bolt,square Neck, cataloged under National Stock Number 5306-00-021-8169, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-021-8169 |
| Item Name | Bolt,square Neck |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Neck Length | 0.456 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN |
| Fastener Length | 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN |
| Thread Length | 1.142 INCHES MINIMUM AND 1.669 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-633,CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Neck Width | 0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN |
| Minimum Yield Strength | 40000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 11 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 1.063 INCHES MINIMUM AND 1.147 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35754-47 | 2/2 Government specification standardization U.S. Government activity |
| 218169 | 5/1 Secondary reference General Motors Corp |
NSN 5306-00-021-8169 is a Bolt,square Neck, classified under FSC 5306, Bolts. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-00-866-1893. Verify interchangeability with system specifications before substitution.
Key specifications for 5306-00-021-8169: Neck Length: 0.456 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN; Fastener Length: 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN; Thread Length: 1.142 INCHES MINIMUM AND 1.669 INCHES MAXIMUM IN; Material Document and Classification: QQ-S-633,CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.