The Bolt,close Tolerance, cataloged under National Stock Number 5306-00-003-4113, is classified within Federal Supply Class 5306 (Bolts) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5306-00-003-4113 |
| Item Name | Bolt,close Tolerance |
| FSC / FSG | 5306 / 53 — Bolts |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.157 INCHES MINIMUM AND 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM0.172 INCHES MAXIMUM IN |
| Fastener Length | 2.540 INCHES MINIMUM AND 2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM2.560 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| Thread Length | 0.311 INCHES MINIMUM AND 0.311 INCHES MINIMUM AND 0.378 INCHES MAXIMUM0.378 INCHES MAXIMUM IN |
| Supplementary Features | FLIGHT SAFETY CRITICAL |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Criticality Code Justification | SUPP |
| Material Document and Classification | MIL-B-83050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | DISHED HEXAGONDISHED HEXAGON |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Grip Length | 2.062 INCHES MINIMUM AND 2.078 INCHES MAXIMUM IN |
| Width Between Flats | 0.492 INCHES MINIMUM AND 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM0.502 INCHES MAXIMUM IN |
| Grip Diameter | 0.3108 INCHES MINIMUM AND 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM0.3117 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 3A3A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 2.425 INCHES MINIMUM AND 2.455 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CA4510-5-33 | 5/9 Secondary reference Howmet Global Fastening Systems Inc. Div Tridair Products |
| MS27576-5-33 | 5/9 Secondary reference U.S. Government activity |
| MS27576-5-33 | 5/9 Secondary reference U.S. Government activity |
| 106467-5-33 | 5/9 Secondary reference U.S. Government activity |
| CIPRD-MS27576-5-33R | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| MS275276-5-33R | 3/2 Design control — primary reference U.S. Government activity |
| AS194-5-33 | 5/9 Secondary reference U.S. Government activity |
NSN 5306-00-003-4113 is a Bolt,close Tolerance, classified under FSC 5306, Bolts. Status: active.
Key specifications for 5306-00-003-4113: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.157 INCHES MINIMUM AND 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM0.172 INCHES MAXIMUM IN; Fastener Length: 2.540 INCHES MINIMUM AND 2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM2.560 INCHES MAXIMUM IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.