PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL2211793
5305PL2211793 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.283 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 0.344 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN, screw_material: STEEL COMP 8630 OR STEEL COMP 4037, fastener_length: 1.266 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-725-0128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL2211793
NSN: 5305-00-725-0128
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.283 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.344 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
screw_materialSTEEL COMP 8630 OR STEEL COMP 4037
fastener_length1.266 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5305-00-725-0128
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL2211793 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.266 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
•
THREAD QUANTITY PER INCH: 32
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 8630 OR STEEL COMP 4037
•
HEAD DIAMETER: 0.283 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH1.266 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD QUANTITY PER INCH32
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 8630 OR STEEL COMP 4037
HEAD DIAMETER0.283 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS3A A
THREAD LENGTH0.344 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
A9676Interchangeable
interchangeable cross-reference
interchangeable
P67453Interchangeable
interchangeable cross-reference
interchangeable
2008115Interchangeable
interchangeable cross-reference
interchangeable
330237P01Interchangeable
interchangeable cross-reference
interchangeable
306970R1Interchangeable
interchangeable cross-reference
interchangeable
MS24694S17Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL2211793?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL2211793?
5305PL2211793 is a SCREW,MACHINE.
What parts can replace 5305PL2211793?
There are 6 known substitutes for 5305PL2211793: A9676, P67453, 2008115 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL2211793?
5305PL2211793 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-725-0128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL2211793

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026