PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL1869994
5305PL1869994 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.202 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN, screw_material: IRON ALLOY 660, fastener_length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-005-5974, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL1869994
NSN: 5305-00-005-5974
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.202 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
screw_materialIRON ALLOY 660
fastener_length0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleTORQUE SET
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength160000 POUNDS PER SQUARE INCH LBS
NSN5305-00-005-5974
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL1869994 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: TORQUE SET
•
THREAD LENGTH: 0.202 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
•
THREAD DIRECTION: RIGHT-HAND
•
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH LBS
•
SCREW MATERIAL: IRON ALLOY 660
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLETORQUE SET
THREAD LENGTH0.202 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
SCREW MATERIALIRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
FASTENER LENGTH0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
S51Interchangeable
interchangeable cross-reference
interchangeable
00725665425097Interchangeable
interchangeable cross-reference
interchangeable
716-056064Interchangeable
interchangeable cross-reference
interchangeable
G55P10507Interchangeable
interchangeable cross-reference
interchangeable
17586Interchangeable
interchangeable cross-reference
interchangeable
Z16202Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL1869994?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL1869994?
5305PL1869994 is a SCREW,MACHINE.
What parts can replace 5305PL1869994?
There are 14 known substitutes for 5305PL1869994: S51, 00725665425097, 716-056064 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL1869994?
5305PL1869994 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-005-5974. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL1869994

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026