PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL1370871
5305PL1370871 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES THREADS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-782-9489, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL1370871
NSN: 5305-00-782-9489
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
thread_length1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
nominal_thread_diameter0.375 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5305-00-782-9489
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL1370871 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 16
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH16
NOMINAL THREAD DIAMETER0.375 INCHES IN
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2; MRAP- M-ATV WITH CS13 POP AND SNE; MRAP - COUGAR CAT1 A2; MEDIUM MINE PROTECTED VEHICLE - MMPV; ARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD STYLEHEXAGON
THREAD LENGTH1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
122181Interchangeable
interchangeable cross-reference
interchangeable
179847Interchangeable
interchangeable cross-reference
interchangeable
MS35295-66Interchangeable
interchangeable cross-reference
interchangeable
180130Interchangeable
interchangeable cross-reference
interchangeable
4019-22Interchangeable
interchangeable cross-reference
interchangeable
7234CTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL1370871?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL1370871?
5305PL1370871 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 5305PL1370871?
There are 14 known substitutes for 5305PL1370871: 122181, 179847, MS35295-66 and 11 more. Substitute compatibility should be verified for your specific system.
Is 5305PL1370871 still available?
5305PL1370871 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL1370871

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026