PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL1369488
5305PL1369488 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.199 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-763-6963, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL1369488
NSN: 5305-00-763-6963
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.199 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-763-6963
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL1369488 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD LENGTH: 0.199 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SCREW SURFACE TREATMENTPASSIVATE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
NOMINAL THREAD DIAMETER0.138 INCHES IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD LENGTH0.199 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
22-244Interchangeable
interchangeable cross-reference
interchangeable
72-6970-585Interchangeable
interchangeable cross-reference
interchangeable
FFB185CLASS6TYPE264GRADE00Interchangeable
interchangeable cross-reference
interchangeable
220SD22Interchangeable
interchangeable cross-reference
interchangeable
10241-28Interchangeable
interchangeable cross-reference
interchangeable
MS51959-28BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL1369488?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL1369488?
5305PL1369488 is a SCREW,MACHINE.
What parts can replace 5305PL1369488?
There are 26 known substitutes for 5305PL1369488: 22-244, 72-6970-585, FFB185CLASS6TYPE264GRADE00 and 23 more. Substitute compatibility should be verified for your specific system.
Is 5305PL1369488 still available?
5305PL1369488 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL1369488

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026