PartsTable
Technical Data Sheet
Download PDF

5305PL1020146 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5305PL1020146: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: MODIFIED PAN, head_height: 0.213 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.594 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN, thread_length: 0.688 INCHES NOMINAL IN, screw_material: STEEL COMP 8740. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-478-0475, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL1020146
NSN: 5305-00-478-0475
FSC: 5305 — Screws
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
head_styleMODIFIED PAN
head_height0.213 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.594 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN
thread_length0.688 INCHES NOMINAL IN
screw_materialSTEEL COMP 8740
fastener_length1.063 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE II
nominal_thread_diameter0.312 INCHES IN
thread_quantity_per_inch24
thread_series_designatorUNF
NSN5305-00-478-0475
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL1020146 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.213 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.063 INCHES NOMINAL IN
•
THREAD LENGTH: 0.688 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: MODIFIED PAN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 8740
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE II
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.213 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
FASTENER LENGTH1.063 INCHES NOMINAL IN
THREAD LENGTH0.688 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEMODIFIED PAN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 8740
INTERNAL DRIVE STYLECROSS RECESS TYPE II
THREAD CLASS3A A
THREAD QUANTITY PER INCH24
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
756432-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5305PL1020146?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL1020146?
5305PL1020146 is a SCREW,MACHINE.
What parts can replace 5305PL1020146?
There is 1 known substitute for 5305PL1020146: 756432-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL1020146?
5305PL1020146 is cataloged in the U.S. Government catalog under NSN 5305-00-478-0475. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL1020146