PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL0944296
5305PL0944296 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES NOMINAL IN, fastener_length: 1.670 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, hardness_rating: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-224-1176, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL0944296
NSN: 5305-00-224-1176
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
head_styleHEXAGON
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
thread_class2A A
thread_length1.500 INCHES NOMINAL IN
fastener_length1.670 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
width_between_flats0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
end_item_identification2320010970260 HEMTT
nominal_thread_diameter0.625 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch11
NSN5305-00-224-1176
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL0944296 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GRADE 8 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
WIDTH BETWEEN FLATS: 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GRADE 8 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
WIDTH BETWEEN FLATS0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH LBS
END ITEM IDENTIFICATION2320010970260 HEMTT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
207MAD1Interchangeable
interchangeable cross-reference
interchangeable
CT34Interchangeable
interchangeable cross-reference
interchangeable
FPN906Interchangeable
interchangeable cross-reference
interchangeable
16TX466Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL0944296?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL0944296?
5305PL0944296 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 5305PL0944296?
There are 4 known substitutes for 5305PL0944296: 207MAD1, CT34, FPN906 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL0944296?
5305PL0944296 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-224-1176. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL0944296

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026