PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL0799716
5305PL0799716 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 1.150 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 1.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-719-5003, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL0799716
NSN: 5305-00-719-5003
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length1.150 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length1.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-719-5003
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL0799716 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD DIAMETER: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD DIAMETER0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD DIAMETER0.250 INCHES IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD LENGTH1.150 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
132Interchangeable
interchangeable cross-reference
interchangeable
90169Interchangeable
interchangeable cross-reference
interchangeable
6A1543Interchangeable
interchangeable cross-reference
interchangeable
22-312Interchangeable
interchangeable cross-reference
interchangeable
B208539Interchangeable
interchangeable cross-reference
interchangeable
M38510/658Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL0799716?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL0799716?
5305PL0799716 is a SCREW,MACHINE.
What parts can replace 5305PL0799716?
There are 11 known substitutes for 5305PL0799716: 132, 90169, 6A1543 and 8 more. Substitute compatibility should be verified for your specific system.
Is 5305PL0799716 still available?
5305PL0799716 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL0799716

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026