PartsTable
Technical Data Sheet
Download PDF

5305PL0795883 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5305PL0795883: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.875 INCHES MAXIMUM IN, fastener_length: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-709-8283, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL0795883
NSN: 5305-00-709-8283
FSC: 5305 — Screws
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
thread_class2A A
thread_length0.875 INCHES MAXIMUM IN
fastener_length0.875 INCHES NOMINAL IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
nominal_thread_diameter0.438 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5305-00-709-8283
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL0795883 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.875 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.875 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.438 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
FASTENER LENGTH0.875 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.875 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.438 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
ASME B18.2.1Reference document
Same NSN cross-reference
Reference document — Secondary reference
B1821BH044F088NReference document
Same NSN cross-reference
Reference document — Secondary reference
5305007098283Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305007104189Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS90727-84Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS90726-84Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5305PL0795883?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL0795883?
5305PL0795883 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 5305PL0795883?
There are 7 known substitutes for 5305PL0795883: ASME B18.2.1, B1821BH044F088N, 5305007098283 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL0795883?
5305PL0795883 is cataloged in the U.S. Government catalog under NSN 5305-00-709-8283. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL0795883

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.