PartsTable
Technical Data Sheet
Download PDF

5305PL0759585 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5305PL0759585: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, grip_length: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN, thread_length: 0.555 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN, fastener_length: 1.445 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-053-5801, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL0759585
NSN: 5305-01-053-5801
FSC: 5305 — Screws
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL OVERALL
grip_length0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
thread_length0.555 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
fastener_length1.445 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
internal_drive_styleOFFSET CRUCIFORM (TORQUE SET)
nominal_thread_diameter0.375 INCHES IN
minimum_tensile_strength220000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch24
NSN5305-01-053-5801
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL0759585 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.445 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.555 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.445 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.555 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
GRIP DIAMETER0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 7
AIC9535-6-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
121754-6-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C9535-6-14Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
5305PL1913438Reference document
Same NSN cross-reference
Reference document — Informative reference only
5305PL1653612Reference document
Same NSN cross-reference
Reference document — Informative reference only
121574-6-14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5305PL0759585?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL0759585?
5305PL0759585 is a SCREW,CLOSE TOLERANCE.
What parts can replace 5305PL0759585?
There are 7 known substitutes for 5305PL0759585: AIC9535-6-14, 121754-6-14, C9535-6-14 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL0759585?
5305PL0759585 is cataloged in the U.S. Government catalog under NSN 5305-01-053-5801. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL0759585

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.