PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305PL0729425
5305PL0729425 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: HEXAGON, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.813 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN, fastener_length: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-576-5417, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL0729425
NSN: 5305-00-576-5417
FSC: 5305
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleHEXAGON
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
thread_length0.813 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
fastener_length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
hardness_rating80.0 ROCKWELL B MINIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
minimum_yield_strength30000 POUNDS PER SQUARE INCH LBS
nominal_thread_diameter0.375 INCHES IN
NSN5305-00-576-5417
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL0729425 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
THREAD CLASS: 2A A
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A A
END ITEM IDENTIFICATION2330-01-537-8217, SEMITRAILER, TANK, 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT; RG-33 MRAP; MRAP BUFFALO MK2A2; MRAP - M-ATV; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
MATERIALSTEEL CORROSION RESISTING OVERALL
THREAD QUANTITY PER INCH16
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
CA310Interchangeable
interchangeable cross-reference
interchangeable
F-24Interchangeable
interchangeable cross-reference
interchangeable
C12233-7Interchangeable
interchangeable cross-reference
interchangeable
AE21-32V1-224Interchangeable
interchangeable cross-reference
interchangeable
A2224Interchangeable
interchangeable cross-reference
interchangeable
42570Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305PL0729425?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL0729425?
5305PL0729425 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 5305PL0729425?
There are 27 known substitutes for 5305PL0729425: CA310, F-24, C12233-7 and 24 more. Substitute compatibility should be verified for your specific system.
Is 5305PL0729425 still available?
5305PL0729425 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL0729425

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026