PartsTable
Technical Data Sheet
Download PDF

5305EG005-3 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5305EG005-3: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND EXTENDED WASHER, head_height: 0.185 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.280 INCHES NOMINAL IN, thread_length: 0.831 INCHES MINIMUM IN, screw_material: STEEL COMP 8740. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-026-8507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305EG005-3
NSN: 5305-00-026-8507
FSC: 5305 — Screws
CAGE: 81996 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
head_styleROUND EXTENDED WASHER
head_height0.185 INCHES NOMINAL IN
thread_class2A A
head_diameter0.280 INCHES NOMINAL IN
thread_length0.831 INCHES MINIMUM IN
screw_materialSTEEL COMP 8740
fastener_length1.016 INCHES NOMINAL IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-026-8507
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305EG005-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.045 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.185 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 1.016 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
•
EXTENDED WASHER DIAMETER: 0.380 INCHES NOMINAL IN
•
THREAD LENGTH: 0.831 INCHES MINIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.045 INCHES NOMINAL IN
HEAD HEIGHT0.185 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH1.016 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
EXTENDED WASHER DIAMETER0.380 INCHES NOMINAL IN
THREAD LENGTH0.831 INCHES MINIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEROUND EXTENDED WASHER
SUBSTITUTES & CROSS-REFERENCES 1
158188Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5305EG005-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305EG005-3?
5305EG005-3 is a SCREW,MACHINE.
What parts can replace 5305EG005-3?
There is 1 known substitute for 5305EG005-3: 158188. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305EG005-3?
5305EG005-3 is cataloged in the U.S. Government catalog under NSN 5305-00-026-8507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305EG005-3