PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305003404750
5305003404750 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.159 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-340-4750, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305003404750
NSN: 5305-00-340-4750
FSC: 5305
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.159 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentOXIDE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-340-4750
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305003404750 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
•
SCREW SURFACE TREATMENT: OXIDE
•
THREAD LENGTH: 0.159 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD66 FED STD ALL MATERIAL RESPONSES
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
NOMINAL THREAD DIAMETER0.138 INCHES IN
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 3C STYLE
SCREW SURFACE TREATMENTOXIDE
THREAD LENGTH0.159 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
THREAD CLASS2A A
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD66 FED STD ALL MATERIAL RESPONSES
HEAD STYLEFLAT COUNTERSUNK
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
2N1701Interchangeable
interchangeable cross-reference
interchangeable
10125206Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
Same NIIN cross-reference
interchangeable
NASM24693-25BInterchangeable
Same NIIN cross-reference
interchangeable
610659Interchangeable
Same NIIN cross-reference
interchangeable
MS24693-25BInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305003404750?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305003404750?
5305003404750 is a SCREW,MACHINE.
What parts can replace 5305003404750?
There are 6 known substitutes for 5305003404750: 2N1701, 10125206, FFS92 and 3 more. Substitute compatibility should be verified for your specific system.
Is 5305003404750 still available?
5305003404750 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305003404750

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026