PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305000190575
5305000190575 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OR STEEL COMP 1050 OVERALL, head_style: HEXAGON, head_height: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.398 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, fastener_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-019-0575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305000190575
NSN: 5305-00-019-0575
FSC: 5305
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL COMP 1020 OR STEEL COMP 1050 OVERALL
head_styleHEXAGON
head_height0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class2A A
thread_length0.398 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
internal_drive_styleSLOT
primary_washer_styleFLAT EXTERNAL TEETH
NSN5305-00-019-0575
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305000190575 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRIMARY WASHER MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD LENGTH: 0.398 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
•
PRIMARY WASHER STYLE: FLAT EXTERNAL TEETH
•
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
HEAD STYLE: HEXAGON
•
MATERIAL: STEEL COMP 1020 OR STEEL COMP 1050 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PRIMARY WASHER MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
THREAD LENGTH0.398 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
PRIMARY WASHER STYLEFLAT EXTERNAL TEETH
HEAD HEIGHT0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
THREAD CLASS2A A
HEAD STYLEHEXAGON
MATERIALSTEEL COMP 1020 OR STEEL COMP 1050 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
170575Interchangeable
interchangeable cross-reference
interchangeable
0839-0022Interchangeable
interchangeable cross-reference
interchangeable
0839-0005PSInterchangeable
interchangeable cross-reference
interchangeable
190575Interchangeable
interchangeable cross-reference
interchangeable
P70Interchangeable
interchangeable cross-reference
interchangeable
MIL-M-6867TYPE4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305000190575?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305000190575?
5305000190575 is a SCREW,ASSEMBLED WASHER.
What parts can replace 5305000190575?
There are 9 known substitutes for 5305000190575: 170575, 0839-0022, 0839-0005PS and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305000190575?
5305000190575 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-019-0575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305000190575

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026