The Screw,machine, cataloged under National Stock Number 5305-01-734-1977, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-734-1977 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN |
| Fastener Length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS5731 OR AMS5732 OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE |
| Surface Treatment Document and Classification | AMS2700, METHOD 1, CLASS 4 ASSN STD SINGLE TREATMENT RESPONSE |
| Thread Length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | A80205-NAS1190 NATIONAL STD/SPEC |
| Locking Feature | STRIP |
| Screw Material | IRON ALLOY 660 |
| Surface Treatment | PASSIVATE |
| Minimum Tensile Strength | 2860.0 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1190 | 3/1 Design control — primary reference U.S. Government activity |
| NAS1190E3T12AF | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-734-1977 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-734-1977: Head Height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN; Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS5731 OR AMS5732 OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE; Surface Treatment Document and Classification: AMS2700, METHOD 1, CLASS 4 ASSN STD SINGLE TREATMENT RESPONSE. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.