PartsTable TECHNICAL DATA SHEET
NSN 5305-01-734-0976Government record, cited

Screw, Close Tolerance5305-01-734-0976

NSN 5305-01-734-0976 · NIIN 017340976
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-734-0976 · 5305017340976 · NIIN 017340976 · 01-734-0976 · FSC 5305 Screws · NAS1580 · NAS1580C3T8Y
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Head Height: 0.083 INCHES NOMINAL IN
  • Point Length: 0.050 INCHES NOMINAL IN
  • Fastener Length: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: AMS2700 METHOD 1, CLASS 4 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.363 INCHES NOMINAL IN
  • Material Document and Classification: AMS5731 OR AMS5732 OR AMS5737 OR AMS5853 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.1900 INCHES IN
Identification
  • NSN: 5305-01-734-0976
  • NIIN: 017340976
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-734-0976, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-734-0976
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Head Height0.083 INCHES NOMINAL IN
Point Length0.050 INCHES NOMINAL IN
Fastener Length0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationAMS2700 METHOD 1, CLASS 4 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.363 INCHES NOMINAL IN
Material Document and ClassificationAMS5731 OR AMS5732 OR AMS5737 OR AMS5853 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.1900 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1580 NATIONAL STD/SPEC
Grip Length0.49 INCHES MINIMUM AND 0.51 INCHES MAXIMUM IN
Grip Diameter0.2202 INCHES MINIMUM AND 0.2207 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch32
MaterialIRON ALLOY 660 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.3813 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-01-734-2158NAS1580C4R13 POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS1580 3/1 Design control — primary reference
U.S. Government activity
NAS1580C3T8Y 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5305-01-734-2158POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
NAS1580C4R13

Frequently Asked Questions

What is NSN 5305-01-734-0976?

NSN 5305-01-734-0976 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-01-734-0976?

1 possible match (shared part number, not a government interchangeability claim): 5305-01-734-2158. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-01-734-0976?

Key specifications for 5305-01-734-0976: Head Height: 0.083 INCHES NOMINAL IN; Point Length: 0.050 INCHES NOMINAL IN; Fastener Length: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS2700 METHOD 1, CLASS 4 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-734-0976 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com