PartsTable TECHNICAL DATA SHEET
NSN 5305-01-734-0377Government record, cited

Screw, Cap, Socket Head5305-01-734-0377

NSN 5305-01-734-0377 · NIIN 017340377 · Part number MS16995-50D7
Naval Inventory Control Point Mechanicsburg · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 03950
Government record, cited
NSN 5305-01-734-0377 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-734-0377. Manufacturer of record part number: MS16995-50D7.
Also searched as  5305-01-734-0377 · 5305017340377 · NIIN 017340377 · 01-734-0377 · FSC 5305 Screws · CAGE 03950 · MS16995-50D7 · MS16995-50
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
  • Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
  • Fastener Length: 1.244 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 1.00 INCHES NOMINAL IN
  • Criticality Code Justification: ZZZW
  • Material Document and Classification: ASTM F 593 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-734-0377
  • NIIN: 017340377
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: MS16995-50D7
  • Manufacturer: Naval Inventory Control Point Mechanicsburg
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-734-0377, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Naval Inventory Control Point Mechanicsburg. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-734-0377
Primary Part NumberMS16995-50D7
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
ManufacturerNaval Inventory Control Point Mechanicsburg
StatusACTIVE
Width Across Flats0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
Head Height0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Fastener Length1.244 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length1.00 INCHES NOMINAL IN
Criticality Code JustificationZZZW
Material Document and ClassificationASTM F 593 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.2500 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Departure From Cited DocumentMATERIAL CONTROLLED IAW SS800-AG-MAN-010/P-9290 SYSTEM CERTIFICATION PRODURES AND CRITERIA MANUAL FOR DEEP SUBMERGENCE SYSTEMS; CRITICAL ITEM FOR SAFETY AND SURVIVAL OF DEEP SUBMERGENCE RESEARCH AND RESCUE VEHICLES AS DIFFERENTIATED BY SPECIAL TEST FEATURES
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength2540.0 POUNDS PER SQUARE INCH LBS
Chamfer Angle30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
Internal Drive StyleHEXAGON
Thread Class3A A
Thread Quantity Per Inch20.0
MaterialSTEEL CORROSION RESISTING OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Head Diameter0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
Cross-Reference Index
Part NumberManufacturer
MS16995-50D7 Naval Inventory Control Point Mechanicsburg (USA)
Reference documents
ReferenceMeaning
MS16995-50 3/1 Design control — primary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5305-01-734-0377?

NSN 5305-01-734-0377 is a Screw,cap,socket Head, manufactured by Naval Inventory Control Point Mechanicsburg, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-734-0377?

NSN 5305-01-734-0377 has 1 manufacturer part number on file: MS16995-50D7 (Naval Inventory Control Point Mechanicsburg).

What are the specifications of MS16995-50D7?

Key specifications for MS16995-50D7: Width Across Flats: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN; Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 1.244 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-734-0377 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com