The Screw,close Tolerance, cataloged under National Stock Number 5305-01-733-3790, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-733-3790 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.048 INCHES NOMINAL IN |
| Fastener Length | 0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | NAS4006 NATIONAL STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.338 INCHES NOMINAL IN |
| Material Document and Classification | AMS4971 UNS R56620 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Specification/standard Data | 80205-NAS1992 THRU 2000 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | ALUMINUM OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | TITANIUM ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.2965 INCHES MINIMUM AND 0.3047 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1993 | 3/1 Design control — primary reference U.S. Government activity |
| NAS1993T4PT | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-733-3790 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
3 possible matches (shared part number, not a government interchangeability claim): 5305-01-733-3794, 5305-01-733-3805, 5305-01-733-3814. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-01-733-3790: Head Height: 0.048 INCHES NOMINAL IN; Fastener Length: 0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS4006 NATIONAL STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.338 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.