The Screw,machine, cataloged under National Stock Number 5305-01-730-9753, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-730-9753 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 2.484 INCHES MINIMUM AND 2.531 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS5731, AMS5732, AMS5737 OR AMS5853 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 2.484 INCHES MINIMUM AND 2.531 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1802 NATIONAL STD/SPEC |
| Width Between Flats | 0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN |
| Screw Material | IRON ALLOY 660 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE III |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Screw Surface Treatment Document and Classification | AMS-QQ-P-416, TYPE 2, CLASS 2 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1802-3-40P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-730-9753 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-730-9753: Head Height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM; Fastener Length: 2.484 INCHES MINIMUM AND 2.531 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS5731, AMS5732, AMS5737 OR AMS5853 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.