The Screw,close Tolerance, cataloged under National Stock Number 5305-01-727-1902, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-727-1902 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OVERALL |
| Head Height | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Fastener Length | 0.472 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS2700,METHOD 1,CLASS 4 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.363 INCHES NOMINAL IN |
| Material Document and Classification | AMS5731, AMS5732, AMS5737 OR AMS5853 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| Single Shear Strength | ERR-060 |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Style | PAN NO. 2 |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| Grip Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1578C3T2 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-727-1902 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-727-1902: Surface Finish: 32.0 MICROINCHES OVERALL; Head Height: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Fastener Length: 0.472 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS2700,METHOD 1,CLASS 4 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.