PartsTable TECHNICAL DATA SHEET
NSN 5305-01-717-6431Government record, cited

Screw, Close Tolerance5305-01-717-6431

NSN 5305-01-717-6431 · NIIN 017176431
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-717-6431 · 5305017176431 · NIIN 017176431 · 01-717-6431 · FSC 5305 Screws · NAS1580 · NAS1580V4R17X
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Head Height: 0.99 INCHES NOMINAL IN
  • Fastener Length: 1.853 INCHES MINIMUM AND 1.883 INCHES MAXIMUM IN
  • Thread Length: 0.403 INCHES NOMINAL IN
  • Material Document and Classification: AMS4928 NATIONAL STD SINGLE MATERIAL RESPONSE OR AMS4967 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.2500 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-01-717-6431
  • NIIN: 017176431
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-717-6431, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-717-6431
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Head Height0.99 INCHES NOMINAL IN
Fastener Length1.853 INCHES MINIMUM AND 1.883 INCHES MAXIMUM IN
Thread Length0.403 INCHES NOMINAL IN
Material Document and ClassificationAMS4928 NATIONAL STD SINGLE MATERIAL RESPONSE OR AMS4967 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.2500 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length1.455 INCHES MINIMUM AND 1.475 INCHES MAXIMUM IN
Grip Diameter0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch28
MaterialTITANIUM ALLOY OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.464 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-01-734-0976NAS1580C3T8Y POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
5305-01-734-2158NAS1580C4R13 POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS1580 D/9 Drawing number reference only
U.S. Government activity
NAS1580V4R17X 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5305-01-734-0976POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
NAS1580C3T8Y
5305-01-734-2158POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
NAS1580C4R13

Frequently Asked Questions

What is NSN 5305-01-717-6431?

NSN 5305-01-717-6431 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-01-717-6431?

2 possible matches (shared part number, not a government interchangeability claim): 5305-01-734-0976, 5305-01-734-2158. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-01-717-6431?

Key specifications for 5305-01-717-6431: Head Height: 0.99 INCHES NOMINAL IN; Fastener Length: 1.853 INCHES MINIMUM AND 1.883 INCHES MAXIMUM IN; Thread Length: 0.403 INCHES NOMINAL IN; Material Document and Classification: AMS4928 NATIONAL STD SINGLE MATERIAL RESPONSE OR AMS4967 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-717-6431 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com