The Screw,close Tolerance, cataloged under National Stock Number 5305-01-716-5214, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-716-5214 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 0.8 MICROMETERS OVERALL |
| Fastener Length | 29.70 MILLIMETERS MINIMUM AND 30.30 MILLIMETERS MAXIMUM MM |
| Thread Pitch in Millimeters | 1.0 |
| Thread Length | 9.5 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM MM |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | NA0008 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 6.0 MILLIMETERS MM |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NA0038 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 19.80 MILLIMETERS MINIMUM AND 20.20 MILLIMETERS MAXIMUM MM |
| Grip Diameter | 5.965 MILLIMETERS MINIMUM AND 5.990 MILLIMETERS MAXIMUM MM |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| Material | STEEL OVERALL |
| Thread Series Designator | MJ |
| Head Diameter | 10.8 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NA0038-060020 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-716-5214 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-716-5214: Surface Finish: 0.8 MICROMETERS OVERALL; Fastener Length: 29.70 MILLIMETERS MINIMUM AND 30.30 MILLIMETERS MAXIMUM MM; Thread Pitch in Millimeters: 1.0; Thread Length: 9.5 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM MM. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.