The Screw,shoulder, cataloged under National Stock Number 5305-01-715-1670, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-715-1670 |
| Item Name | Screw,shoulder |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.250 INCHES NOMINAL IN |
| Head Height | 0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Fastener Length | 1.397 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM B633 TYPE 2, CLASS FE/ZN 5 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Distance From Centerline to Flat | 0.3645 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN |
| Thread Length | 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Material Document and Classification | NAS-21472 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.3750 INCHES IN |
| Head Style | DEE CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | ZINC OVERALL |
| Minimum Tensile Strength | 9310 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.729 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS51975-91P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-715-1670 is a Screw,shoulder, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-715-1670: Width Across Flats: 0.250 INCHES NOMINAL IN; Head Height: 0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Fastener Length: 1.397 INCHES MINIMUM AND 1.437 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM B633 TYPE 2, CLASS FE/ZN 5 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.